1045 Galvanized Rod

1045 Galvanized Rod

Length: 3000mm - 12000mm customizable Zinc Layer Thickness: 80g/m² - 650g/m² Standard: ASTM, AISI, ASME, DIN, JIS, EN, GB

A3 Galvanized Rod

A3 Galvanized Rod

Zinc Layer Thickness: 80g/m² - 650g/m² Processing: Bending, Welding, Cutting, Drilling Application: Bridge structures, shipping, ect

A36 Carbon Steel Bar

A36 Carbon Steel Bar

A36 is a low-carbon steel containing trace amounts of manganese, phosphorus, sulfur, silicon and other elements such as copper. A36 has good weldability and high yield strength, and is the most specified structural steel plate by engineers. ASTM A36 is most commonly manufactured as a variety of structural steel parts. This grade is used for welded, bolted or riveted construction of bridges and buildings, as well as for general structural purposes. Due to its lowest yield point, A36 can be used to design lighter-weight structures and equipment, and provide good weldability.

AISI/SAE 1045 C45 Carbon Steel Bar

AISI/SAE 1045 C45 Carbon Steel Bar

1045 is characterized by medium carbon, medium tensile strength steel, which has quite good strength, machinability and reasonable weldability under hot-rolled conditions. 1045 round steel can be provided with hot rolling, cold drawing, rough turning or turning and polishing. By cold-drawing the 1045 steel bar, the mechanical properties can be improved, the dimensional tolerance can be improved, and the surface quality can be improved.

316Ti Stainless Steel Bar

316Ti Stainless Steel Bar

316Ti(UNS S31635) is a titanium stabilized version of 316 molybdenum-containing austenitic stainless steel. 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than traditional chromium-nickel austenitic stainless steels such as 304.

201 Stainless Steel Bar

201 Stainless Steel Bar

Type 201 stainless steel is an austenitic chromium-nickel-manganese stainless steel, which is developed to save nickel. Type 201 is a low-cost alternative to traditional Cr-Ni stainless steels such as 301 and 304. The nickel is replaced by added manganese and nitrogen. It cannot be hardened by heat treatment, but can reach high tensile strength by cold working. Type 201 is essentially non-magnetic in the annealed condition and becomes magnetic upon cold working. In many applications, the 201 type may replace the 301 type.

< 1234...8 >